What is Epoxy Top Coat?
Areas of use and suitable primers and topcoats
Recommended Uses As a final coat in multi-layer coating systems for concrete surfaces or as a single coating system in maintenance operations. Suitable Primers Epoxy Sealer
Application Details
Surface preparation All oil, grease, dirt and other contaminants must be removed from the surface. (5900) Mixing Instructions After thoroughly mixing component A with a suitable mixer, gradually add component B and mix thoroughly for about 5 minutes. Let the mixture sit for an additional 5 minutes before diluting to allow for pre-reaction time. Do not dilute each component separately. Theoretical Consumption 4 Hours at 25°C Pot life 200 gr/m² – 75 Micron KFK
Properties of final epoxy polyamine color.
Polyamine epoxy finishing paint is a two-component paint that is prepared after combining the epoxy resin with the polyamine hardener and applied as a final coat to the surfaces. The use of the final color is associated with numerous advantages, among which are the following.
High resistance:
This paint has high resistance to chemicals including acids, bases and solvents. It is also resistant to abrasion, impact and moisture.
Health:
It is a suitable choice for health as it has low absorption of microbes and fungi. On the other hand, it is washable.
Beauty:
Using this color increases the beauty and shine of the surfaces.
High durability:
High durability: It is long-lasting and resistant to different weather conditions such as sunlight, rain, snow.
Color variety:
It is available in different colors and can be used on different surfaces.
How to apply the final epoxy polyamine color?
The final epoxy polyamine paint application must be done by expert and experienced people. Before applying the paint, it is necessary to make sure that the base coat is dry. Then apply the final color according to the instructions below.
- Surface preparation: The surface must be clean, dry and free from all dirt, oil and dust.
- Mixing the paint: Thoroughly mix the epoxy resin and polyamine hardener according to the manufacturer’s instructions. Apply the paint in two or three thin coats, allowing it to dry completely between each coat.
- Applying the paint: Spread the paint evenly over the surface using a roller or spray.
- Drying time: You should pay attention to the time it takes for the paint to dry completely.
- When applying the final epoxy polyamine paint, the ambient temperature should be between 10 and 30 degrees Celsius. Also, the humidity should be below 60%.
Storage conditions
- Store the final epoxy polyamine paint in a cool, dry environment away from direct sunlight.
- The best temperature to store this material is between 10 and 25 degrees Celsius.
- Prevent the paint from freezing.
- Store paint in a closed container so that the substance does not come into contact with air and moisture.
- Keep the paint away from heat sources and flammable materials.
Safety tips
Use adequate ventilation when mixing and applying the final epoxy polyamine paint. It is mandatory to use a respiratory mask, goggles and gloves while working. Contact with skin or eyes is dangerous. Therefore, in case of contact, the area should be washed immediately with plenty of water and a doctor should be consulted. Avoid smoking and creating sparks or flames near the workplace. Avoid swallowing or breathing paint fumes.
Reviews
There are no reviews yet.